The complete Starlink Mini mounting and power solution designed specifically for ARB Base Racks.
This bundle combines our Australian-made Starlink Mini Mount, dedicated ARB Base Rack Bridging Brackets, Anderson Plug Mount and 12V–30V Booster into one complete setup - giving you a secure, vibration absorbing mounting system with a clean, reliable power solution ready for touring.
Unlike mounts that clamp the Starlink Mini directly against hard surfaces, our mount uses a full Anti-Shock EVA Foam Cradle to support and isolate the dish from vibration while travelling over corrugations, tracks and rough roads.
The included ARB Base Rack Bridging Brackets are designed to span the rack structure and provide the mounting points required to securely install the Starlink Mini Mount onto your ARB Base Rack.
Bundle Includes
- SVNTY OFFROAD Starlink Mini Mount
- White Protective Cover
- Anti-Shock Internal Cradle
- Set of two ARB Base Rack Bridging Brackets
- Anderson Plug with 12V to 30V Voltage Booster
- Integrated Anderson-to-DC power cable
- Stainless steel mounting hardware
Built For Touring
Designed and manufactured in Brisbane, Australia, the system keeps your Starlink Mini securely mounted and ready to use without setting up and packing away the dish every time you stop.
The integrated Anderson Plug and voltage booster setup allows the Starlink Mini to be powered from your vehicle's 12V system while keeping the installation neat, compact and protected.
One bundle. Mounting, vibration protection and power - built specifically for Starlink Mini on the ARB Base Rack.
Reliable 12V Power For Starlink Mini
The SVNTY OFFROAD Starlink Mini Mount Booster includes a high-efficiency DC-DC converter that safely steps your vehicle’s 12V supply up to the optimal 30V to power the Starlink Mini.
This allows Starlink Mini to run directly from:
- Vehicle accessory circuits
- Auxiliary battery systems
- Portable battery banks
- Off-grid touring setups
Designed for reliability in harsh Australian touring conditions, the converter is sealed, efficient, and protected against voltage spikes and overheating.
Model No. DCDC12S30
- Input Voltage 12V DC
- Output Voltage 30V DC
- Output Current 3.5A
- Efficiency 94%
FEATURES
- Non-isolated between input and output
- Internal capacitor: NCC & NICHICON
- 100% full load burn-in test
- Over-voltage, overload, over-temperature protection
- Waterproof rating IP68
- 12 months warranty
WORKING SCHEMATIC
Battery Bank/Other → DC-DC Converter → Load
SPECIFICATIONS
Input
- Rated Voltage 12V
- Voltage Range 9-28V
- Efficiency 94%
- Positive cable (red) 50A Anderson total length 80mm
- Negative cable (black) 50A Anderson total length 80mm
Output
- Voltage 30V
- Maximum rated current 3.5A
- Maximum rated power 105W
- Voltage regulation +/- 1%
- Load regulation +/- 2%
- Ripple and noise <150 mV (full load)
- Output cable 260mm
Function
- Waterproof IP68
- Over temperature protection YES
- Over voltage protection YES
Mechanical
- Weight 150g
- Size 65x62x22mm
Why A DC-DC Converter Is Required
Starlink Mini requires 30V DC input, while most vehicle electrical systems supply 12V.
The included converter safely boosts voltage while maintaining stable output, protecting the Starlink Mini from:
- voltage drop
- unstable vehicle electrical systems
- overload conditions
Starlink Mini Power Consumption And 12V Battery Setup
How Much Power Does Starlink Mini Use?
Starlink Mini typically draws 20–60 watts during normal operation, depending on network activity and signal strength.
During initial startup or heavy data usage, power consumption can briefly increase.
| Mode | Typical Power Draw |
|---|---|
| Idle / Low Activity | 20–30W |
| Normal Operation | 30–45W |
| Heavy Data Use | Up To 60W |
Because Starlink Mini requires 30V DC input, most 12V vehicle systems cannot power it directly.
The SVNTY OFFROAD Starlink Mini Mount Booster includes a high-efficiency 12V to 30V DC-DC converter that allows the unit to run safely from:
- 12V vehicle batteries
- auxiliary battery systems
- portable power stations
- off-grid touring setups
This eliminates the need for a 240V inverter, improving efficiency and reducing unnecessary battery drain.
Why Use A DC-DC Converter Instead Of An Inverter?
Running Starlink Mini through a 240V inverter wastes power because electricity must be converted twice.
12V → 240V → 30V
The SVNTY OFFROAD power booster uses a direct 12V → 30V conversion, which is significantly more efficient.
Benefits include:
- longer battery runtime
- less heat generation
- reduced load on your electrical system
- simpler installation
Engineered For Reliable Power And Built For Real Off-Road Touring, The SVNTY OFFROAD Starlink Mini Booster Keeps You Connected Wherever The Track Leads.